heat aging
英 [hiːt ˈeɪdʒɪŋ]
美 [hiːt ˈeɪdʒɪŋ]
热陈化；热老化
双语例句
- The influence of peptizer B on Mooney viscosity, plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。 - Starting from the special adhesive property for plastic cooling fillers used in cooling tower, this article discussed and studied the composition and main adhesion and property of damp and heat aging.
前言：本文从冷却塔淋水填料的粘结性能要求及“专用性”出发，讨论并研究了它的组成成份及主要的粘结和湿热老化性能。 - Application of Improved Blind Hole Method to Welded Iron Tower Joint for Stress Relieving with Heat Aging
改进型盲孔法在铁塔焊接接头热时效消除应力中的应用 - The influence and influence mechanism of heat aging on the attenuation of PMMA polymer optical fiber ( POF) were studied.
主要研究了热老化对PMMA塑料光纤损耗的影响及其影响机理。 - The results shows that the modified resin has better mechanical properties, adhesive force and water resistance, and with the low cost of heat aging and electrical property.
以环氧树脂改性有机硅树脂，测试并分析比较了环氧改性有机硅及有机硅复合材料的力学性能、电学性能、耐水性及耐热老化性能等。 - The wet skid resistance and heat aging resistance of 1,2-polybutadiene rubber are excellent, and the heat build-up is especially low, and the resistances to hot oxygen and ozone aging are good.
硫化胶的力学性能类似于BR，但抗湿滑性能突出，生热特别低，耐热氧、臭氧老化性能良好。 - The results showed that NXT gave silica-filled NR compound better scorch safety and heat aging resistance, and gave similar dynamic mechanical properties to vulcanizate;
结果表明，与TESPT相比，加入NXT的胶料具有较好的抗焦烧性能和耐热老化性能，两者硫化胶的动态力学性能相当； - MAA-Zn could also decrease the activation energy of vulcanization, and increase the crosslinking density and the resistance to heat aging of vulcanizate.
经分析可知，MAA－Zn还可以降低硫化反应活化能、提高硫化胶的交联密度和耐热老化性能。 - The test results showed that the physical property retention of IIR cured with resin after 160 ℃× 24 h heat aging was superior to those cured with sulfur or sulfur donor;
研究结果表明：经过160℃×24h热老化后，树脂硫化IIR的力学性能保持率比硫黄硫化和硫给予体硫化IIR高； - The results have shown that MCA can increase tensile strength and hardness of NBR and also improve the properties of resistance to heat aging and compression set of NBR as well.
结果表明金属活性助剂MCA，在不同的硫化体系中可提高丁腈橡胶的拉伸强度、硬度，改善丁腈橡胶的耐热老化性能及压缩永久变形性能。 - And the heat aging properties were further improved by adding ISAF/ GPF and ricinus oil.
采用ISAF/GPF并用以及添加蓖麻油，可以获得较好的耐热老化性能。 - It is suggested that the tensile strength and impact strength of wet ABS sample through hot water aging may be used to judge its damp& heat aging properties. The test condition and qualified target has been determined and be used in related specialized standard.
提出以经过热水老化后的ABS塑料湿态试样的拉伸及冲击强度性能项目来评判它的耐湿热老化性能，确定了试验条件和性能合格指标，已采用在有关的专业标准之中。 - Based on the tests of residual stresses in diesel engine cylinder blocks, treating effect of heat aging and vibration aging on eliminating residual stress has been analyzed.
本文通过测定柴油机缸体的残余应力，分析热时效与振动时效消除残余应力的效果。 - The effect of nano-TiO2 content and its surface treatment on the mechanical properties, thermal property, rheological behaviour, flame-retardancy, heat aging behaviour of HEPS/ nano-TiO2/ TAS composites have been studied in detail.
详细研究了纳米TiO2含量及表面处理对制备的纳米复合材料力学性能、热学性能、流变性能、阻燃性能、热老化性能等的影响。 - The Properties of Adhesive and Damp& Heat Aging of Special Adhesive for Plastic Cooling fillers
塑料淋水填料专用粘结剂及其粘结和湿热老化性能 - Whether plasticizer or reinforcer was added, POEs still maintained good heat aging property.
无论是添加增强剂或增塑剂，POEs仍然保持良好的耐热老化性能。 - The heat aging properties of TPE were improved when degree of polymerization of PVC was increased.
增加PVC的聚合度，TPE的耐热老化性能提高； - : The damp and heat aging life expectancy of two industrial CSPE moistureproof coating has been reckoned.
本文对两种工业用氯磺化聚乙烯（CSPE）涂料的防潮涂层进行了湿热老化使用寿命的实验研究和推算。 - The property of ABS sheet and cooling tower parts with damp& heat aging has been studied.
本文研究了ABS塑料片材和冷却塔部件的耐湿热老化性能。 - The performance of SBS 、 SBS/ SBR 、 SBS/ APP polymer modified asphalt waterproofing membranes was studied. The results show that the heat resistance and heat aging resistence of the membranes were obviously improved by SBS and APP composite modification.
分别对SBS、SBS/SBR、SBS/APP改性沥青及其防水卷材的性能进行分析测试，试验结果表明，采用SBS/APP复合改性可改善SBS改性沥青防水卷材的耐高温和热老化性能。 - By contrast test, characters of insulating glass sealant filled with mineral oil were compared with that of unfilled with mineral oil, such as durability, heat aging resistance, adhesive ability and the compatibility with hot melt butyl sealant, as well as ultraviolet irradiating resistance.
通过对比实验，比较了掺油和未掺油中空玻璃密封胶的耐久性、热老化性能、粘接性能以及与热熔丁基密封胶的相容性，比较了其制造的中空玻璃的耐紫外辐照性能。 - Effective factors on heat aging properties of IIR vulcanizate
IIR耐热老化性能影响因素的研究 - The Influence Factors on Heat Aging Properties of CR/ CIIR Blends
影响CR/CIIR硫化胶耐热老化性能的因素 - The optimization heat aging properties were obtained when antioxidant 2246 was used and the optimization amount was 2 phr.
抗氧剂2246对TPE的耐热老化性能最好，其最佳用量为2.0份。 - Influence of curing system on heat aging properties of EPDM
硫化体系对EPDM耐热老化性能的影响 - Utilizing heat aging experiments, thermal analysis technique, X-ray diffraction etc, this article investigates stability and crystal properties of polyaniline/ poly ( vinyl alcohol) films.
利用热老化实验、热分析技术、X-射线衍射等考察了聚苯胺/聚乙烯醇复合膜的稳定性能和结晶性能； - When 10 parts iron oxide red was added and 260 ℃ × 24 h heat aging on RTV-1 silicone rubber, the tensile strength, tensile elongation and hardness change of the rubber were less than 10%.
当氧化铁红的用量为10份时，RTV-1硅橡胶经260℃×24h热老化后，其拉伸强度、扯断伸长率及硬度的变化率均小于10%； - The effect of TMTD on the curing behaviour, physical properties, heat aging property and permanent set at high temperature of CO/ ECO was investigated.
研究促进剂TMTD用量对均聚型氯醚橡胶（CO）/共聚型氯醚橡胶（ECO）并用胶硫化特性、物理性能、耐热老化性能和高温压缩永久变形的影响。 - It was found that all rare earth oxides selected could improve the heat resistance of silicone rubber. Among them, cerium oxide shows the most remarkable improvement on heat aging property.
研究表明，稀土氧化物可以提高硅橡胶的耐热性，其中以氧化铈的作用最为显著。